We know our parts and products. Connect the new GT2electrical connector to the body harness of the vehicle with . Trace the fuel pump connector at the back of the car and test for incoming voltage using a . Burned connectors and harnesses on failed pumps are extremely . Same with the power wire from the relay to the fuel pump connector.
You can also try sliding the wire between two fingers while slightly bending .
Fuel surge tank pump bulkhead wiring kit.
This will pull in the fuel pump relay and you SHOULD get 12VDC at the . THIS CONNECTOR IS ECOMPATIBLE. This product is made of high-quality materials to serve you for years to come. Shop the best selection of Wiring, Harnesses, Switches, Connectors ,. Brake Pressure Modulator Sensor Connector (1). Fuel Pump Connector - Part Number WPT3by Motorcraft. From below, the tank is held in position by the five bolts . The power circuit for the fuel pump in the Fiero has to travel through several connectors before making . Nearly of all aftermarket fuel pump failures are caused by: – Misdiagnosis.
Vehicle related electrical wiring or connector issues. Next, I tested the power going to the fuel pump via the connector. Note: On later model trucks, there is no separate fuel pump test connector , . While connected to the fuel pump connector (red arrow), turn the key ON.
The DVOM (yellow arrow) should read battery volts (around volts). The fuel pump is located under the driver side back seat. Day Guarantee - click to select year. Go back to the fuel tank access ports.
Remove the electrical connector for the fuel pump. Check the fuel injection fuses (AMP) and fuel pump fuse. The TIPM internal fuel pump relay must be disabled and an external fuel pump relay must be.
Figure – Locate Brown Wire in 50-Way Connector. Or, remove the fuel pump fuse, and crank for seconds.
No comments:
Post a Comment
Note: only a member of this blog may post a comment.